Cold-applied anticorrosion tape making machine is designed for producing the PE tape for protection of underground or overhead pipelines in oil, gas, petrochemical, and wastewater industries.
Designed for high efficiency and reliability, this machine is essential in the production of cold-applied anticorrosion tapes, offering a cost-effective and durable solution for pipeline protection. The system is fully automated, reducing labor costs while maintaining a high standard of quality and consistency. The machine is ideal for use in high-demand industries where pipeline integrity is critical, and the risk of corrosion must be minimized.
The equipment mainly consists of three parts:
1.PE base film extrusion production line
2.Adhesive coating equipment
3.Slitting equipment.
The process of making cold-wrapped tape:
1.Base Film Extrusion
Raw Material Preparation: Polyethylene (PE) is prepared as the base film raw material.
Extrusion Molding: The raw material is heated and melted in an extruder, then molded through a die to form a continuous base film.
Cooling and Shaping: The extruded base film is cooled and shaped using cooling rollers to ensure uniform thickness and consistency.
2.Adhesive Coating
Adhesive Preparation: Butyl rubber are prepared to ensure proper viscosity and stability.
Coating Process: The adhesive is evenly applied to one or both sides of the base film using coating equipment to form an adhesive layer.
3.Slitting
Slitting Preparation: The coated base film roll is prepared, and the parameters of the slitting equipment are adjusted.
Slitting Operation: The wide roll is slit into cold-applied tapes of the required width using slitting equipment.
Winding and Packaging: The slit cold-applied tapes are wound into rolls, packaged, and prepared for shipment.
PE basing file extrusion line Equipment
| Equipment Name | Quantity | |
| 1 | Vacuum automatic feeder | 1 |
| 2 | Hopper dryer | 1 |
| 3 | SJ-75X30 extruder | 1 |
| 4 | Hydraulic screen changer | 1 |
| 5 | Die head mold type 1000 | 1 |
| 6 | Multi-roller tape-casting machine | 1 |
| 7 | Winding machine | 1 |
| 8 | PLC computer control system | 1 |
Adhesive coating machine Equipment
| No. | Equipment Name | Qua. |
| 1 | Frame | 1 unit |
| 2 | 200N·M Magnetic powder brake + Silicone stick 1300mm with corona processor | 1 unit |
| 3 | 100N·M Magnetic powder brake | 1 unit |
| 4 | 100N·M magnetic powder clutch | 2 unit |
| 5 | 200N·M magnetic powder clutch | 1 unit |
| 6 | Screw | 1 unit |
| 7 | Force-feed device | 1 unit |
| 8 | Constant pressure system | 1 unit |
| 9 | Adhesive delivery pipe | 1 unit |
| 10 | Winding machine | 1 unit |
| 11 | Unwinding machine | 2 unit |
| 12 | Coating compound equipment | 1 unit |
| 13 | Main engine frequency converter | 1 unit |
| 14 | Extruder frequency converter | 1 unit |
| 15 | Thermal switch | 1 unit |
| 16 | PLC | 1 unit |
